Home > Electrical Components >

Capacitor--High voltage parallel capacitor

Product Categories

8PT Switchgear [1]
Low Voltage Switchgear [1]
Blockset Switchgear [1]
Low Voltage Switchgear Accessories [11]
MNS Switchgear [1]
4TH Generation Switchgear [2]
Electrical Components [18]
GCK Switchgear [1]
GCS Switchgear [1]
Ring Main Unit MXGN Series [1]
Ring Main Unit MGC series [1]
Ring Main Unit MGA series [1]
Dry Air Gas Insulated Switchgear [1]
Gas Insulated Switchgear [1]
Armored metal-enclosed switchgear [1]
Vacuum circuit breaker [2]
Handcart [2]
Grounding switch [1]
Chassis [2]
Contact box [1]
Contact box transformer [1]
Contact box transfer copper bar [1]
Grounding interlock [1]
Emergency unlock [1]
Aluninum rail left and right [1]
Tulip Contact [1]
Main Circuit Moving Connector [1]
Main Circuit Fixed Connector [1]
LV Switchgear Connection Components [4]
LV Switchgear Drawer and Accessories [5]
LV Switchgear Operating Mechanism [2]

ANSHAN ANZA ELECTRONIC POWER CO., LTD

Contact Now

Capacitor--High voltage parallel capacitor

Ask Lasest Price
Payment Terms :	T/T
Delivery Time :	30days

Add to Cart

Product Details
Company Profile

Capacitor--High voltage parallel capacitor

Overview:
The AZ111 series self-healing low-voltage parallel power capacitors are suitable for use in power frequency AC power systems with a rated voltage of 1000V and below, for improving power factor and voltage quality.

Meet the standard:

GB/T12747.1-2017

GB/T12747.2-2017

IEC 60831-1:2014

IEC 60831-2:2014

Technical Specifications:

Normal working conditions and installation conditions
Environmental temperature	-25°℃~+50°℃
Relative humidity	<50% at 40 ° C; <90% at 20 ° C
Altitude	<2000m
Environmental conditions:	No harmful gases and vapors, no conductive or explosive dust, no severe mechanical vibration. It should be ensured to work under good ventilation conditions, and it is not allowed to work in a closed and unventilated environment.
Performance metrics
Rated voltage	(0.25~0.69)kV,AC
Rated frequency	50Hz or 60Hz
Rated capacity	\|(1～40)kvar
Capacitor deviation	－5%～ +10%
AC withstand voltage	Inter electrode withstand voltage: Apply 2.15Un/AC between capacitor terminals for 10 seconds, and there should be no permanent breakdown or flashover
AC withstand voltage	Extreme shell withstand voltage: Apply 3.5kV/AC between the capacitor terminal and the shell for 10 seconds, and there should be no permanent breakdown or flashover
Tangent value of loss angle	Under rated power frequency voltage, at 20℃, tanδ<0.001
Maximum allowable overvoltage	1.1Un; no more than 8 hours per 24 hours
Maximum allowable overcurrent	1.3In
Self discharge characteristics	Apply a voltage of √ 2Un DC to the capacitor, and after disconnecting the power supply for 3 minutes, the remaining voltage drops to below 75V or lower

Capacitor--High voltage parallel capacitor

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	ANSHAN ANZA ELECTRONIC POWER CO., LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Electrical Components products from this supplier

Find Similar Products By Category:

Construction & Real Estate

Hot Searches: